The Use of New Methylene Blue in Pseudomonas aeruginosa Biofilm Destruction

A Pseudomonas aeruginosa biofilm was produced in a model system using the bacterial strain NCIMB 8295, grown on silicone tubing (bore size 0.75 cm). Destruction of the biofilm was attempted using either ampicillin or a combination of white light (light dose=7.2 J cm^{m 2}) and the phenothiazinium photosensitiser new methylene blue, and damage, both to extra-cellular polymeric substance (EPS) and to the organism, was monitored. It was found that although little damage to the EPS occurred with ampicillin, NMB caused both cell death and breakdown of the EPS, suggesting the use of photodynamic antimicrobial chemotherapy (PACT) in the disinfection of pathogenic biofilms, e.g. at external catheter surfaces.     

Adsorptive Immobilization of a Pseudomonas Strain on Solid Carriers for Augmented Decolourization in a Chemostat Bioreactor

Pseudomonas GM3, a highly efficient strain in cleavage of azo bonds of synthetic dyes under anoxic conditions, was immobilized via adsorption on two types of carriers, porous glass beads and solid PVA particles. The cells were cultivated in a nutrient medium, adsorbed on sterile carriers, stabilized as biofilms in repeated batch cultures, and introduced into a chemostat activated sludge reactor for augmented decolourization. The microbial cells were quickly adsorbed and fixed on the PVA surface, compared to a slow and linear immobilization on the glass surface. The porous structure of glass beads provided shelter for the embedded cells, giving a high biomass loading or thick biofilm (13.3 mg VS ml^?1 carrier) in comparison with PVA particles (4.8 mg VS ml^?1 carrier), but the mass transfer of substrate in the biofilm became a significant limiting factor in the thicker biofilms (effectiveness factor η = 0.31). The microbial decolourization rate per volume of carriers was 0.15 and 0.17 mg dye ml^?1 of glass beads and PVA particles, respectively. In augmented decomposition of a recalcitrant azo dye (60 mg l^?1), the immobilized Pseudomonas cells in porous glass beads gave a stable decolourization efficiency (80 - 81%), but cells fixed on solid PVA particles showed an initial high colour removal of 90% which then declined to a stable removal efficiency of 81%. In both cases, the colour removal efficiency of the chemostat bioreactor was increased from < 10% by an activated sludge to ～80% by the augmented system.     

Synthesis,characterization and in vitro activity of a surface-attached antimicrobial cationic peptide

Infection associated with implanted biomaterials is common and costly and such infections are extremely resistant to antibiotics and host defenses. Consequently, there is a need to develop surfaces which resist bacterial adhesion and colonization. The broad spectrum synthetic cationic peptide melimine has been covalently linked to a surface via two azide linkers, 4-azidobenzoic acid (ABA) or 4-fluoro-3-nitrophenyl azide (FNA), and the resulting surfaces characterized by X-ray photoelectron spectroscopy and contact angle measurements. The quantity of bound peptide was estimated by a modified Bradford assay. The antimicrobial efficacy of the two melimine-modified surfaces against Pseudomonas aeruginosa and Staphylococcus aureus was compared by scanning electron microscopy (SEM) and fluorescence microscopy. Attachment of melimine via ABA gave an approximately 4-fold greater quantity of melimine bound to the surface than attachment via FNA. Surfaces melimine-modified by either attachment strategy showed significantly reduced bacterial adhesion for both strains of bacteria. P. aeruginosa exposed to ABA–melimine and FNA–melimine surfaces showed marked changes in cell morphology when observed by SEM and a reduction of approximately 15-fold (p < 0.001) in the numbers of adherent bacteria compared to controls. For the ABA–melimine surface there was a 33% increase in cells showing damaged membranes (p = 0.0016) while for FNA–melimine there was no significant difference. For S. aureus there were reductions in bacterial adhesion of approximately 40-fold (p < 0.0001) and 5-fold (p = 0.008) for surfaces modified with melimine via ABA or FNA, respectively. There was an increase in cells showing damaged membranes on ABA–melimine surfaces of approximately 87% (p = 0.001) compared to controls, while for FNA–melimine there was no significant difference observed. The data presented in this study show that melimine has excellent potential for development as a broad spectrum antimicrobial coating for biomaterial surfaces. Further, it was observed that the efficacy of antimicrobial activity is related to the method of attachment.     

Inactivation of Pseudomonas aeruginosa biofilms formed under high shear stress on various hydrophilic and hydrophobic surfaces by a continuous flow of ozonated water

Abstract

The inactivation of Pseudomonas aeruginosa biofilms grown on glass under high shear stress and exposed to a range of dissolved ozone concentrations (2, 5 and 7?ppm) at 10 and 20?min was investigated. The regression equation, log reduction (biofilm)?=?0.64?+?0.59×(C – 2)?+?0.33×(T – 10), described the dependence of biofilm inactivation on the dissolved ozone concentration (C, ppm) and contact time (T, min). The predicted D-values were 11.1, 5.7 and 2.2?min at 2, 5 and 7?ppm, respectively. Inactivation of biofilms grown on various surfaces was tested at a single dissolved ozone concentration of 5?ppm and a single exposure time of 20?min. Biofilms grown on plastic materials showed inactivation results similar to that of biofilms on glass, while biofilms grown on ceramics were statistically significantly more difficult to inactivate, suggesting the importance of utilizing non-porous materials in industrial and clinical settings.     

N-acyl homoserine lactone mediated interspecies interactions between A. baumannii and P. aeruginosa

Acinetobacter baumannii and Pseudomonas aeruginosa are pathogens capable of colonizing the same infection sites and employing N-acyl homoserine lactone (AHL) based quorum-sensing systems to co-ordinate biofilm formation. Hence, the effect of P. aeruginosa AHLs on biofilm formation by A. baumannii and vice versa were investigated using the biofilm impaired quorum sensing mutants, A. baumannii M2 (abaI::Km) and P. aeruginosa PAO-JP2. Complementing the mutants with heterologous, extracted and pure AHLs increased biofilm mass significantly. The surface area coverage and biovolume also increased significantly as observed by confocal scanning laser microscopy which corroborated scanning electron microscope analysis. Autoinducer synthase gene promoters of A. baumannii, P _abaI-lacZ, and P. aeruginosa, P _lasI-lacZ, were induced (p < 0.05) by heterologous AHLs. Growth of A. baumannii was not inhibited by pyocyanin of P. aeruginosa which may allow their co-existence and interaction in the clinical setting, thereby affecting the severity of combined infections and therapeutic measures to control them.     

Biofilm formation in an experimental water distribution system: the contamination of non-touch sensor taps and the implication for healthcare

Hospital tap water is a recognised source of Pseudomonas aeruginosa. UK guidance documents recommend measures to control/minimise the risk of P. aeruginosa in augmented care units but these are based on limited scientific evidence. An experimental water distribution system was designed to investigate colonisation of hospital tap components. P. aeruginosa was injected into 27 individual tap ‘assemblies’. Taps were subsequently flushed twice daily and contamination levels monitored over two years. Tap assemblies were systematically dismantled and assessed microbiologically and the effect of removing potentially contaminated components was determined. P. aeruginosa was repeatedly recovered from the tap water at levels above the augmented care alert level. The organism was recovered from all dismantled solenoid valves with colonisation of the ethylene propylene diene monomer (EPDM) diaphragm confirmed by microscopy. Removing the solenoid valves reduced P. aeruginosa counts in the water to below detectable levels. This effect was immediate and sustained, implicating the solenoid diaphragm as the primary contamination source.     

Magnetic fields suppress Pseudomonas aeruginosa biofilms and enhance ciprofloxacin activity

Due to the refractory nature of pathogenic microbial biofilms, innovative biofilm eradication strategies are constantly being sought. Thus, this study addresses a novel approach to eradicate Pseudomonas aeruginosa biofilms. Magnetic nanoparticles (MNP), ciprofloxacin (Cipro), and magnetic fields were systematically evaluated in vitro for their relative anti-biofilm contributions. Twenty-four-hour biofilms exposed to aerosolized MNPs, Cipro, or a combination of both, were assessed in the presence or absence of magnetic fields (Static one-sided, Static switched, Oscillating, Static + oscillating) using changes in bacterial metabolism, biofilm biomass, and biofilm imaging. The biofilms exposed to magnetic fields alone exhibited significant metabolic and biomass reductions (p < 0.05). When biofilms were treated with a MNP/Cipro combination, the most significant metabolic and biomass reductions were observed when exposed to static switched magnetic fields (p < 0.05). The exposure of P. aeruginosa biofilms to a static switched magnetic field alone, or co-administration with MNP/Cipro/MNP + Cipro appears to be a promising approach to eradicate biofilms of this bacterium.     

Antimicrobial and antifouling polymeric coating mitigates persistence of Pseudomonas aeruginosa biofilm

Abstract

Food wasted due to food spoilage remains a global challenge to the environmental sustainability and security of food supply. In food manufacturing, post-processing contamination of food can occur due to persistent bacterial biofilms, which can be resistant to conventional cleaning and sanitization. The objective was to characterize the efficacy of a polymeric coating in reducing Pseudomonas aeruginosa biofilm establishment and facilitating its removal. Viable cell density of a 48?h biofilm was reduced by 2.10 log cfu cm^?2 on the coated surface, compared to native polypropylene. Confocal laser scanning and electron microscopy indicated reductions in mature biofilm viability and thickness on the coated material. The antifouling coating improved cleanability, with ～2.5 log cfu cm^?2 of viable cells remaining after 105?min cleaning by water at 65?°C, compared to 4.5 log cfu cm^?2 remaining on native polypropylene. Such coatings may reduce the persistence of biofilms in food processing environments, in support of reducing food spoilage and waste